- Distribution & Breakers & Circuit Protection
- Fuse Blocks
- Blue Sea Systems 5503 Fuse Block ANL 750 Amp 1
— You save $12.31
Blue Sea Systems 5503 Fuse Block with Insulating Cover - 35 to 750A
- Cover included
- Accepts 5/16" (M8) ring terminals
- For use on systems up to 32 Volts DC
- Swing out design allows replacement of the fuse without removing fasteners
- Stainless steel studs provide resistance to corrosion and high torquing for excellent electrical contact
- UL 94-V0 base resists high heat
- Insert molded studs ensure secure fuse mounting
- Insulating cover satisfies ABYC/USCG requirements
- Cover breakouts allow wire access in any direction
- Fuse sold separately
- Maximum Voltage: 32V DC
- Base Material:Reinforced Polycarbonate
- Fuse Mounting Blocks: Tin-Plated Copper
- Maximum Cable Size: 4/0 AWG
- Maximum Torque: 107 in-lb (12.09 Nm)
- Terminal Stud Size: 5/16-18 (M8)
- Weight: 1.06lb (0.48 kg)
Combination multiple gang fuse blocks with brass fuse clips and screws. Can be used with 1/4 x 1-1/4 fuses for circuit distribution and also features separate grounding terminal bar. ...
Combination multiple gang fuse blocks with brass fuse clips and screws. Can be used with 1/4 x 1-1/4 fuses for circuit distribution and also features separate grounding terminal bar...
Blue Sea Systems
Blue Sea Systems 5006 Fuse Block MAXI 30-80 Amp The most economical fuse block for 30-80 Ampere fusing Features: Snap-on terminal cover insulates all conductive parts, satisfying ABYC/USCG...
Blue Sea Systems
ANL Fuses 35 - 100 Amp 5164 5165 5122 5124 5125 Features: Ignition protected (conforming to SAE J1171)- safe for installation aboard gasoline powered boats...
Blue Sea Systems
ANL Fuses 325 & 400 Amp 5134 5136 Features: Ignition protected (conforming to SAE J1171)- safe for installation aboard gasoline powered boats (35-500 Amp only) Silver-plated connector...
Customers Also Viewed
Now: $6.49 - $19.99
Blue Sea Systems 65 Amp Terminals 2602 2604 2606 2608 2610 Features: Closed back design completely insulates power from the mounting surface Each screw pair is 1 isolated...
Blue Sea Systems 7287 Triple Pole Breaker 50A AC 2.5 in Specifications: Operating Temperature Range: -40°C to +85°C Terminal Screw ¼ - 20 SS Maximum torque 35...
Blue Sea Systems 5502 Fuse Block Type T 225-400 amp Features: The fuse system recommended by most inverter manufacturers for high speed response to short circuits Clear insulating cover,...
Blue Sea Systems ST Blade Fuse Block With Cover - 6 Circuit with Negative Bus Features: Positive distribution bus with #10-32 stud Can be used for 24-hour circuits Cover satisfies ABYC/USCG...
Blue Sea Systems 8029 120V AC Main + 1 Position Circuit Breaker Traditional Metal Panel - AC Main + 1 Positions Features: Red reverse polarity indicating LED All hot, neutral and safety...
Blue Sea Systems 8027 120V AC Main + 6 Pos. Cir. Breaker Panel Traditional Metal Panel - AC Main + 6 Positions Features: Red reverse polarity indicating LED All hot, neutral and safety ground...
Blue Sea Systems WeatherDeck Water Resistant Fuse Panel 2 Position Gray Features: Rated IP67 - Temporary immersion for 30 minutes Designed for flybridge and open cockpit...
Blue Sea Systems Dual Bus 100A Common BusBar 5 x 8-32 Screw Terminal 2701 Features: 5 x 8 - 32 Screw Terminal Combines negative and positive buses on one block CE...
Blue Sea Systems 5022 Fuse Holder Cap Water Resistant Fuse Holder Replacement Cap Features: Replaces cap for 5021 Will withstand the water exposures normally encountered in above deck...
Blue Sea Systems MaxiBus 12 x 10-32 Screw Common Bus Busbars are used to consolidate multiple wires or feed multiple circuits Features: Terminal Studs: 2 x 5/16" - 18 Terminal Screws: 12 x #1-...